Filters
Apply
Lietuvių
English
Polski
Nederlands
Español
Deutsch
Eur
Złoty
0
0
Our offers
Tractor units
DAF
MAN
Mercedes-Benz
Volvo
Scania
DAF
MAN
Mercedes-Benz
Volvo
Scania
XF 480
TGX 18.470
TGX 18.480
TGX 18.510
TGX 18.520
Actros 1845
FH 460
FH 500
FH 540
R450
XF 480
TGX 18.470
TGX 18.480
TGX 18.510
TGX 18.520
Actros 1845
FH 460
FH 500
FH 540
R450
2020
2021
2022
2023
2023
2022
2023
2023
2020
2021
2022
2023
2020
2021
2022
2023
2019
2020
2021
2022
2023
2019
2020
2021
2022
2023
2023
2020
2021
2022
2023
2023
2022
2023
2023
2020
2021
2022
2023
2020
2021
2022
2023
2019
2020
2021
2022
2023
2019
2020
2021
2022
2023
2023
Space Cab
Super Space Cab
Space Cab
Super Space Cab
GX
GM
GX
GM
GX
GX
GM
GX
GM
GX
BigSpace
BigSpace
BigSpace
BigSpace
Globetrotter XL
Globetrotter XL
Globetrotter XL
Globetrotter XL
Globetrotter XL
Globetrotter XL
Globetrotter XL
Globetrotter XL
Globetrotter XL
Globetrotter XL
Globetrotter XL
Globetrotter XL
Globetrotter XL
Globetrotter XL
CR20H
Refrigerated semi-trailers
Chereau
Krone
Schmitz Cargobull
Chereau
Krone
Schmitz Cargobull
CSD3
SDR 27
SKO 24
SKO 27
CSD3
SDR 27
SKO 24
SKO 27
2023
2018
2020
2021
2022
2023
2019
2020
2021
2022
2018
Tautliner semi-trailers
Krone
Schmitz Cargobull
Krone
Schmitz Cargobull
SDP 27
SCS 24
SDP 27
SCS 24
2018
2022
2017
2018
2019
2020
2021

MAN ZBR Fault Codes List

The ZBR (Zone Body Room) in MAN trucks refers to the On-Board Computer (OBC) codes related to the truck’s body or cabin zone. These codes provide information and diagnostics specifically for the body and cabin systems of the truck, such as lighting, climate control, instrumentation, and other features.

Man Fault Codes Img

Fault codes

Code Description
38 Reserve, the fuel level in the tank 2. Priority 5: Display during stop and while driving. Fault: 1. too high; 2. Too low; 3. Unacceptable; 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: R1 / 14.
70 Signal "parking brake". Priority 2: The fault, which requires removal of the service center. Fault: 8. Wrong signal.
96 Reserve, the fuel level in the tank 1. Priority 5: Display during stop and while driving. Fault: 1. too high; 2. Too low; 3. Unacceptable; 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: R1 / 13.
98 Engine oil level.
100 Signal "Engine oil pressure." Priority 4: No display does not affect the operability. Fault: 8. Wrong signal.
102 Signal "pressure air charge." A warning light on the instrument panel constantly lit in red, and when moving or stopped. Instead, the real pressure signal is simulated by a replacement signal. The engine is an inadequate amount of air, in consequence, significantly reduced power. Faulty sensor, broken wire, loose contacts, intercooler (intercooler) is blocked or forced air system is not tight.
110 Signal "Engine coolant temperature". Priority 4: No display does not affect the operability. Fault: 8. Wrong signal.
111 Signal "Engine coolant level". Priority 5: Display during stop and while driving. Fault: 6. Short to Ubat .; 10. Open. Pinout A302: R1 / 13.
158 ZBR2 voltage power when the ignition (terminal 15, ignition). Priority 2: The fault, which requires removal of the service center. Pinout A302: ZE17.
159 Margin, the level of the gas pressure in the tank. Priority 2: The fault, which requires removal of the service center. Fault: 1. too high; 2. Too low; 5. Short to Ground; 6. Short to Ubat. Pinout A302: X / 1.
168 ZBR2 voltage supply, plus a constant battery missing (terminal 30-0 Ubat.). Priority 1: Requires stopping the engine. Fault: 1. too high; 2. Too low; 10. Open. Pinout A302: ZE / 18.
171 The temperature of the outside air.
175 The oil temperature in the engine.
190 Engine speeds. A warning light on the instrument panel constantly lit in red, and when moving or stopped. The engine can not be started or the engine may stall spontaneously. Registration and collection of data on the signal of cranked and distributive shaft motor rotation speed is not functioning.
513 Engine torque.
520 Signal "The weakening of the braking retarder". Priority 4: No display does not affect the operability. Fault: 8. Wrong signal.
597 Signal "Brake ABS, ASR, EBS" Priority 2: Fault requiring removal of the service center. Fault: 8. Wrong signal.
639 Data Bus T-CAN Higt, serial communication. Priority 1: Requires stopping the engine. Fault: 4. No signal. Pinout A302 M / 1.
639 Data Bus T-CAN Low, serial communication. Priority 1: Requires stopping the engine. Fault: 4. No signal. Pinout A302 M / 7.
767 Including the transfer of R. Priority 2: Fault requiring removal of the service center. Fault: 5. Short to Ground. Pinout A302 M / 6.
1007 Brake function replacement.
1031 Function replacement parking lighting.
1086 Residual pressure in the circuit 3 electric pneumatic system (ECAM). Priority 1: Requires the engine stop or Priority 2: Fault requiring removal of the service center. Fault: 1. too high; 2. Too low; 4. The signal is absent; 6. Short to Ubat. Pinout A302: R1 / 8.
1087 Residual pressure in the circuit 1 electric pneumatic system (ECAM). Priority 1: Requires stopping the engine. Fault: 1. too high; 2. Too low; 4. The signal is absent; 6. Short to Ubat. Pinout A302: R1 / 11.
1088 2 residual pressure in the circuit of electric pneumatic system (ECAM). Priority 1: Requires stopping the engine. Fault: 1. too high; 2. Too low; 4. The signal is absent; 6. Short to Ubat. Pinout A302: R1 / 9.
1089 Residual pressure in the electric circuit 4 of the pneumatic system (ECAM). Priority 1: Requires stopping the engine. Fault: 1. too high; 2. Too low; 4. The signal is absent; 6. Short to Ubat. Pinout A302 M / 2.
1235 Data bus I-CAN Higt, serial communication. Priority 1: Requires stopping the engine. Fault: 4. No signal. Pinout A302: R2 / 9.
1235 Data bus I-CAN Low, serial communication. Priority 1: Requires stopping the engine. Fault: 4. No signal. Pinout A302: R2 / 10.
1376 ZBR2 voltage supply, plus a constant battery missing (terminal 30-1 Ubat.). Priority 1: Requires stopping the engine. Fault: 1. too high; 2. Too low; 10. Open. Pinout A302: ZE / 13.
1624 Vehicle speed.
1667 Braking signal retarder (timeout). Priority 2: The fault, which requires removal of the service center. Fault: 8. Wrong signal.
2987 Chassis number in the tachograph or ZBR2 parameters do not fit to the car. Priority 1: Requires stopping the engine. Fault: 3. Unacceptable.
3000 ZBR2 system, information about emergency shutdown. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground. Pinout A302: F1 / 12.
3001 ZBR2 system, wake up the computer. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground. Pinout A302: F1 / 11.
3102 Terminal 30-1 is connected. Priority 1: Requires stopping the engine. Fault: 1. too high; 2. Too low; 10. Open. Pinout A302: ZE / 9.
3103 ZBR2 voltage supply, analog ground. Pinout A302 M / 16.
3104 ZBR2 voltage supply, analog ground. Pinout A302: R1 / 15.
3107 ZBR2 voltage supply, ignition switched on (relay terminal 15). Priority 2: The fault, which requires removal of the service center. Fault: 5. Short to Ground; 10. Open. Pinout A302: F2 / 12.
3108 ZBR2 voltage supply batteries power switch. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 10. Open. Pinout A302: F2 / 18.
3111 ZBR2 voltage supply, starter switch (terminal 50). Priority 1: Requires stopping the engine. Priority 2: The fault, which requires removal of the service center. Priority 3: Display during stop. Priority 4: No display does not affect the operability. Priority 5: Display during stop and while driving. Pinout A302: ZE / 5.
3201 The pressure drop on the air filter of the engine. Priority 5: Display during stop and while driving. Fault: Too low 2; 5. Short to Ground; 6. Short to Ubat. Pinout A302: X / 3.
3300 Generator, W. Terminal Priority 2: Fault requiring removal of the service center. Fault: 3. Unacceptable. Pinout A302 M / 14.
3301 Generator, L. The terminal Priority 2: Fault requiring removal of the service center. Fault: 4. No signal. Pinout A302 M / 4.
3302 Generator terminal B +. Priority 3: Display during stop. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302 M / 8.
3303 Signal D + (engine running). Priority 2: The fault, which requires removal of the service center. Fault: 5. Short to Ground; 6. Short to Ubat. Pinout A302: F2 / 17.
3335 Supply voltage (no data). Priority 4: No display does not affect the operability. Fault: Fault 0 is missing or faulty control unit.
3400 Solenoid valve for preheating. Priority 3: Display during stop. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302 M / 13.
3401 Relay preheating. Priority 3: Display during stop. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: ZE / 8.
3402 Current glow plugs. Priority 3: Display during stop. Fault: 10. Open. Pinout A302: ZE / 19.
3403 Current glow plugs. Priority 3: Display during stop. Fault: Too low 2; 3. Unacceptable; 10. Open. Pinout A302: ZE / 20.
3500 Malfunction trailer ABS (ABS, ASR, EBS). Priority 5: Display during stop and while driving. Fault: Fault 0 is missing or faulty control unit. Pinout A302: X / 2.
3501 Trailer ABS, power consumption. Priority 5: Display during stop and while driving. Fault: 1. too high; 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: R2 / 14.
3502 Tractor braking signal. Priority 2: The fault, which requires removal of the service center. Fault: 1. too high; 2. Too low; 5. Short to Ground; 6. Closing naUbat .; 10. Open. Pinout A302: R2 / 4.
3503 Braking signal trailer. Priority 2: The fault, which requires removal of the service center. Fault: 1. too high; 2. Too low; 5. Short to Ground; 6. Closing naUbat .; 10. Open. Pinout A302: R2 / 5.
3568 Retarder is enabled. Fault: Fault 0 is missing or faulty control unit.
3569 Engine brake is turned on. Fault: Fault 0 is missing or faulty control unit.
3570 The service brakes are included. Fault: Fault 0 is missing or faulty control unit.
3600 The fluid level in the clutch. Priority 5: Display during stop and while driving. Fault: 6. Short to Ubat .; 10. Open. Pinout A302: R1 / 2.
3602 Relay reversing light. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: F2 / 13.
3603 Turning otopleniyaKongsberg system. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302 M / 18.
3625 Creep speed. Priority 2: The fault, which requires removal of the service center. Fault: 6. Short to Ubat. Pinout A302: X / 4.
3800 Front axle level (air podveskaECAS). Priority 5: Display during stop and while driving. Fault: Fault 0 is missing or faulty control unit; 4. The signal is absent; 5. Short circuit to ground. Pinout A302: R2 / 17.
3903 The fuel temperature in the tank 1. Priority 5: Display during stop and while driving. Fault: 1. too high; 2. too low. Pinout A302: R1 / 10.
4000 Switch headlights. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: F1 / 17.
4001 Dipped beam, left side. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: BL / 6.
4002 Dipped beam, right side. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: BR / 2.
4003 Left headlamp height adjustment. Priority 5: Display during stop and while driving. Fault: Fault 0 is missing or faulty control unit; 3. Unacceptable; 4. The signal is absent; 8. wrong signal; 9. Faulty component. Pinout A302: BL / 3.
4004 Right headlamp height adjustment. Priority 5: Display during stop and while driving. Fault: Fault 0 is missing or faulty control unit; 3. Unacceptable; 4. The signal is absent; 8. wrong signal; 9. Faulty component. Pinout A302: BR / 6.
4005 Turning on the tractor, left rear. Priority 5: Display during stop and while driving. Fault: 1. too high; 2. Too low; 5. Short to Ground; 6. Closing naUbat .; 10. Open. Pinout A302: R2 / 1.
4006 Turning on the tractor, right rear. Priority 5: Display during stop and while driving. Fault: 1. too high; 2. Too low; 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: R2 / 13.
4007 Turning on the towing vehicle, or the front left side. Priority 5: Display during stop and while driving. Fault: 1. too high; 2. Too low; 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: BL / 4.
4008 Turning on the tractor, right front or side. Priority 5: Display during stop and while driving. Pinout A302: BR / 3.
4009 Switch turns the pointer, the Hall sensor (on the steering wheel to the left). Priority 5: Display during stop and while driving. Fault: 6. Short to Ubat .; Pinout A302: F1 / 3.
4010 Switch turns the pointer, the Hall sensor (on the steering wheel to the right). Priority 5: Display during stop and while driving. Fault: 6. Short to Ubat .; Pinout A302: F1 / 6.
4011 Switch flashing light on the left. Priority 5: Display during stop and while driving. Fault: 6. Short to Ubat .; 10. Open. Pinout A302: F1 / 15.
4012 Switch flashing light on the right. Priority 5: Display during stop and while driving. Fault: 6. Short to Ubat .; 10. Open. Pinout A302: F1 / 16.
4013 Alarm, warning lamp. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: F2 / 16.
4014 Alarm, switch. Priority 2: The fault, which requires removal of the service center. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: F1 / 1.
4015 Turning on the trailer to the left. Priority 5: Display during stop and while driving. Fault: 1. too high; 2. Too low; 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: R2 / 3.
4016 Turning on the trailer, right. Priority 5: Display during stop and while driving. Fault: 1. too high; 2. Too low; 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: R2 / 2.
4017 Main beam, left side. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: BL / 5.
4018 Main beam, right side. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: BR / 1.
4019 Main beam, push button. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: F1 / 13.
4020 Intermittent headlights, push button.
4021 Additional main beam, left side. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: BL / 1.
4022 Additional high beam, right side. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: BR / 4.
4023 Additional high beams on the roof of the relay. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: F2 / 14.
4024 Rear fog lights on the tractor. Priority 5: Display during stop and while driving. Fault: 1. too high; 2. Too low; 5. Short to Ground; 6. Short to Ubat .; Pinout A302: R2 / 16.
4025 Rear fog lights on the trailer. Priority 5: Display during stop and while driving. Fault: 1. too high; 2. Too low; 5. Short to Ground; 6. Short to Ubat .; Pinout A302: R2 / 15.
4026 Fog lights, right side. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: BR / 5.
4027 Fog lights, left side. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: BL / 2.
4028 Control lamp fog lights, unlocking inclusion. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 6. Short to Ubat .; Pinout A302: X / 12.
4029 Additional fog lamp relay. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: F2 / 18.
4030 Lanterns parking lights on the vehicle right side. Priority 5: Display during stop and while driving. Fault: Fault 0 is missing or faulty control unit; 1. Too high; 2. Too low; 10. Open. Pinout A302: ZE / 1.
4031 Lanterns parking lights on the vehicle left side. Priority 5: Display during stop and while driving. Fault: Fault 0 is missing or faulty control unit; 1. Too high; 2. Too low; 10. Open. Pinout A302: ZE / 7.
4032 Lanterns parking light, right side. Priority 5: Display during stop and while driving. Fault: 3. Unacceptable. Pinout A302: ZE / 10.
4033 Lanterns parking light, left side. Priority 5: Display during stop and while driving. Fault: 3. Unacceptable. Pinout A302: ZE / 14.
4034 Side marker lights, right side. Priority 5: Display during stop and while driving. Fault: 1. too high; 2. Too low; 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: R2 / 7.
4035 Side marker lights, left side. Priority 5: Display during stop and while driving. Fault: 1. too high; 2. Too low; 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: R2 / 6.
4036 Lanterns trailer parking light, right side. Priority 5: Display during stop and while driving. Fault: Fault 0 is missing or faulty control unit; 1. Too high; 2. Too low; 10. Open. Pinout A302: ZE / 3.
4037 Lanterns trailer parking light, left side. Priority 5: Display during stop and while driving. Fault: Fault 0 is missing or faulty control unit; 1. Too high; 2. Too low; 10. Open. Pinout A302: ZE / 2.
4038 Parking light switch. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: ZE / 4.
4039 Switch parking light. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: F1 / 14.
4040 Winter mode switch. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: F2 / 18.
4042 Check the lighting. Priority 6: An indication of the critical state of security. 0. The fault is missing or defective control unit.
4043 Checking lighting lock. Priority 4: No display does not affect the operability. Fault: Fault 0 is missing or faulty control unit.
4044 Check lighting unlock. Priority 4: No display does not affect the operability. Fault: Fault 0 is missing or faulty control unit.
4045 System indicator lamps on both sides, including. Priority 5: Display during stop and while driving. Fault: 3. Unacceptable.
4046 Calibration Identification of the headlamps angle system. Priority 4: No display does not affect the operability. Fault: Fault 0 is missing or faulty control unit.
4100 Middle winter light, right side. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: BR / 2.
4101 Middle winter light, left side. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: BL / 6.
Code Description
4102 Far winter light, right side. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: BR / 1.
4103 Far winter light, left side. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: BL / 5.
4104 Lanterns back winter parking light, right side. Priority 5: Display during stop and while driving. Fault: Fault 0 is missing or faulty control unit; 1. Too high; 2. Too low; 10. Open. Pinout A302: ZE / 1.
4105 Tail light winter parking light, left side. Priority 5: Display during stop and while driving. Fault: Fault 0 is missing or faulty control unit; 1. Too high; 2. Too low; 10. Open. Pinout A302: ZE / 7.
4109 Switch camouflage headlight. Priority 5: Display during stop and while driving. Pinout A302: F1 / 2.
4113 Side light, right side, the relay. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: X / 17.
4200 Interior lighting and lighting steps, right side. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: F2 / 5.
4201 Interior lighting and lighting steps, left side. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: F2 / 4.
4300 Windshield washer fluid, the level sensor. Priority 5: Display during stop and while driving. Fault: Too low 2; 6. Short to Ubat. Pinout A302: F1 / 7.
4301 Windshield washer fluid pump. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: F2 / 15.
4302 Wiper, intermittent switch. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; Pinout A302: F1 / 5.
4303 Wiper, master oscillator switches intermittent mode. Priority 2: The fault, which requires removal of the service center. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: X / 18.
4304 Washer, key switch. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; Pinout A302: F1 / 4.
4305 Wiper, rain sensor signal presence. Priority 3: Display during stop. Pinout A302: F1 / 18.
4306 Windscreen washers, liquid level sensor. Priority 5: Display during stop and while driving. Fault: Too low 2; 6. Short to Ubat .; 10. Open. Pinout A302: R1 / 5.
4307 Windscreen washers, pump. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: F2 / 1.
4308 Wiper Motor, speed. Priority 2: The fault, which requires removal of the service center. Pinout A302: F2 / 6.
4309 Wiper motor, the speed of rotation. Priority 2: The fault, which requires removal of the service center. Pinout A302: F2 / 6.
4310 Wiper relay. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: ZE / 6.
4311 Limit the wiper switch. Priority 5: Display during stop and while driving. Fault: 3. Unacceptable; 4. The signal is absent. Pinout A302: F1 / 10.
4312 Wiper Switch. Priority 2: The fault, which requires removal of the service center. Pinout A302: X / 15.
4400 Central lubrication system, the amount of lubricant in the system. Priority 5: Display during stop and while driving. Fault: Too low 2; 6. Short to Ubat .; 10. Open. Pinout A302: F2 / 8.
4401 Central lubrication system, engine. Priority 5: Display during stop and while driving. Fault: 4 signal is absent; 5. Short circuit to ground. Pinout A302: X / 16.
4402 Central lubrication system, the pump gauge. Priority 5: Display during stop and while driving. Fault: 4 signal is absent; 6. Short to Ubat .; 10. Open. Pinout A302: F2 / 11.
4403 Central lubrication system, switch. Priority 5: Display during stop and while driving. Fault: 6. Short to Ubat .; Pinout A302: X / 6.
4500 Hydraulic steering system, oil level in one circuit. Priority 5: Display during stop and while driving. Fault: 6. Short to Ubat .; Pinout A302: R1 / 6.
4502 Hydraulic steering system, oil level in the 2 circuit. Priority 5: Display during stop and while driving. Fault: 6. Short to Ubat .; Pinout A302: R1 / 4.
4523 Hydraulic steering system, oil pressure in one circuit. Priority 2: The fault, which requires removal of the service center. Fault: 4 signal is absent; 5. Short circuit to ground. Pinout A302: X / 11.
4524 Hydraulic steering system, oil pressure in the circuit 2. Priority 2: The fault, which requires removal of the service center. Fault: 4 signal is absent; 5. Short circuit to ground. Pinout A302: X / 10.
4600 Door contact, right. Priority 5: Display during stop and while driving. Pinout A302: F1 / 8.
4601 Door contact, left. Priority 5: Display during stop and while driving. Pinout A302: F1 / 9.
4800 Mating alarm central lock. Priority 5: Display during stop and while driving. Fault: 3. Unacceptable. Pinout A302: X / 7.
5000 Buzzer in the instrument panel. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 6. Short to Ubat .; 10. Open. Pinout A302: F2 / 9.
5001 Lamp fault indication in the instrument panel. Priority 5: Display during stop and while driving. Fault: 5. Short to Ground; 6. Short to Ubat .; Pinout A302: X / 14.
5600 Fixing the cockpit. Priority 1: Requires stopping the engine. Fault: Fault 0 is missing or faulty control unit; 6. Short to Ubat .. Pin A302: R1 / 1.
570 Target position ACC (speed control system with automatic maintenance of a safe distance). Priority 2: The fault, which requires removal of the service center. Fault: 5. Short to Ground; 6. Short to Ubat .. Pin A302: F2 / 2.
6000 Tachograph TCO1, failure when receiving or sending a message. Priority 2: The fault, which requires removal of the service center. Fault: 8. wrong signal.
6001 ACC (control system with automatic speed maintaining a safe distance), failure when receiving or sending a message. Priority 5: Display during stop and while driving. Fault: 8. wrong signal.
6002 Date and time, failure when receiving or sending a message. Priority 2: The fault, which requires removal of the service center. Fault: 8. wrong signal.
6003 Control vehicle speed, failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6004 Dashboard, failure when receiving or sending a message. Priority 2: The fault, which requires removal of the service center. Fault: 8. wrong signal.
6005 Post EBS1 EBS system (brake system with an electronically controlled), failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6006 Post ECAS1 sistemyECAS (air suspension with electronically controlled), failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6008 Post EEC1 (electronic motor controller), the FFR system (car computer), failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6009 Post ERC_REvspomogatelnogo retarder, failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6010 Post ERC_RD primary retarder, failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6011 Lil pressure in the engine failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6012 Coolant temperature, failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6013 Environmental conditions, failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6016 Post EBS3 EBS system (brake system with an electronically controlled), failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6017 Post EBS4 EBS system (brake system with an electronically controlled), failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6018 Signal Engine speed, failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6020 Post ETC2 sistemyFFR, failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6021 Post ETC3 FFR system failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6022 Signal fuel consumption since the last reset, failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 4. No signal.
6023 Signal fuel consumption in liters per hour, the failure at the reception or transmission of messages while driving. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6024 Details of the charge air pressure, failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6025 Post TC1_FT sistemyFFR with automatic transmission failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6026 Notice of ACC1 ACC signal indication, failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6027 Aux_stat_ZBR_1 signal is not transmitted through the channel dannyhT-CAN as 1 message failure when receiving or sending a message. Priority 4: No display does not affect the operability.
6028 Aux_stat_ZBR_1 signal is not transmitted on the channel I-CAN data as 1 message failure when receiving or sending a message. Priority 4: No display does not affect the operability.
6029 Signal in the data channel I-CANukazatelya level in the tank washer fluid, failure when receiving or sending a message. Priority 4: No display does not affect the operability.
6030 Message motor tormozaERC1_RX by FFR, failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6032 Aux_stat_ZBR_2 signal is not transmitted on the channel I-CAN data as 2 message failure when receiving or sending a message. Priority 4: No display does not affect the operability.
6033 Signal Aux_stat_ZBR_3 not transmitted data channel I-CAN as a message 3, failure when receiving or sending a message. Priority 4: No display does not affect the operability.
6034 Reserve Aux_stat_ZBR_4 signal is not transmitted through the data channel I-CAN as a message 4, failure when receiving or sending a message. Priority 4: No display does not affect the operability.
6035 Signal "Vehicle Power" in the CAN channel, voltage at terminal 30 and 15 of the EDC by the FFR, failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6036 Signal level of the liquid in the secondary retarder, the refusal of admission or when sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6037 Signal level of the liquid in the primary retarder, refusal of admission or when sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6038 Post EEC2 2elektronnoy engine management system failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6039 Signal for the liquid level in the gearbox failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6040 signal for the load on the rear axle (EBS system), failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6041 Signal on loading the vehicle (ECAS system), failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6042 Signal for engine configuration failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6043 Message "SPN Response (MAN request for data)" for channel I-CAN data failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6044 Message "SPN Response (MAN request for data)" for channel I-CAN data failure when receiving or sending a message. Priority 4: No display does not affect the operability.
6045 Post ECAM1 channel data T-CAN, the remaining pressure signal failure when receiving or sending a message. Priority 4: No display does not affect the operability.
6046 Posted by WSK system (gidrotransformatornoe clutch), failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6047 Post VDC1 not accepted because of the failure of the data channel T-CAN, failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6048 Post ETC2 channel I-CAN data failure when receiving or sending a message. Priority 4: No display does not affect the operability.
6050 Posted by DM1 ZBR2 channel I-CAN data failure when receiving or sending a message. Priority 4: No display does not affect the operability.
6051 Post DM1 fault memory and pamyatiOBDU (onboard diagnostic device), failure when receiving or sending a message. Priority 4: No display does not affect the operability.
6052 Notice of the chassis number on the channel I-CAN data failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6053 Posted by KSM2 (control device for external data exchange) via the data T-CAN, failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6054 Post ASS1_A ECAS (air suspension with electronically controlled), failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6055 Post ASS1_B ECAS (air suspension with electronically controlled), failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6056 Post ASS1_B ECAS (air suspension with electronically controlled), failure when receiving or sending a message.
6057 Report on the chassis number on the channel I-CAN data failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6058 Signal Aux_Stat Inst2 channel I-CAN data on the data channel are no posts about switching, failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6059 Post ESP, failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6060 Post ASS3 ECAS (air suspension with electronically controlled), failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6061 Notice of the vehicle weight by sistemyECAS (air suspension with electronically controlled), failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6062 Notice of the vehicle weight from the EBS (brake system with an electronically controlled), failure when receiving or sending a message. Priority 4: No display does not affect the operability. Fault: 8. wrong signal.
6202 Post Aux_stat_ZBR2 channel I-CAN data (manufacturer reserve for ZBR iliZBRO). Priority 4: No display does not affect the operability.
6203 Post Aux_stat_ZBR3 channel I-CAN data (manufacturer reserve for ZBR or ZBRO). Priority 4: No display does not affect the operability.
6204 Modified soobschenieETC2 channel I-CAN data (manufacturer reserve for ZBR or ZBRO). Priority 4: No display does not affect the operability.
6205 Message from the instrument panel through the channel I-CAN data (manufacturer reserve for ZBR or ZBRO). Priority 4: No display does not affect the operability.
6206 Post ECAM1 channel T-CAN data (manufacturer reserve for ZBR or ZBRO). Priority 4: No display does not affect the operability.
6207 Post ECAM1 channel I-CAN data (manufacturer reserve for ZBR or ZBRO). Priority 4: No display does not affect the operability.
6208 Post DM1 ZBR2 (manufacturer reserve for ZBR or ZBRO). Priority 5: Display during stop and while driving.
6209 Post DM1 OBDU channel I-CAN data (manufacturer reserve for ZBR or ZBRO). Priority 5: Display during stop and while driving.
6250 Buffer CAN data communications channel is absent (the manufacturer reserves for ZBR or ZBRO). Priority 4: No display does not affect the operability. Fault: 4. No signal.
6251 Messages in the channel dannyhCAN not processed (the manufacturer reserves for ZBR or ZBRO). Priority 4: No display does not affect the operability. Fault: 4. No signal.
6280 ROM error check (program code) (manufacturer reserve for ZBR or ZBRO). Priority 2: The fault, which requires removal of the service center. Fault: 3. Unacceptable.
6281 ROM check error (EOL option (factory programming)) (manufacturer reserve for ZBR or ZBRO). Priority 2: The fault, which requires removal of the service center. Fault: 3. Unacceptable.
6302 K-cable KWP2000 (a protocol for diagnosis using a PC), Serial communication. Priority 2: The fault, which requires removal of the service center. Pinout A302 M / 10.
6303 T-CAN Masse, serial communication. Pinout A302 M / 9.
6304 Signal indicating temporary failure data channel T-CAN, serial communication. Priority 4: No display does not affect the operability. Fault: 4. No signal.
6305 Signal the temporary failure I-CAN data channel serial communication. Priority 4: No display does not affect the operability. Fault: 4. No signal.
8010 Notice of the pressure drops below an acceptable level vECAM (air suspension with electronically controlled). Priority 1: Requires the engine stop or Priority 2: Fault requiring removal of the service center. Fault: 2. Too low.
8104 Residual pressure in the circuit 5 (input circuit) in the ECAM system (air suspension with electronically controlled). Priority 1: Requires stopping the engine. Fault: 1. too high; 2. Too low; 4. The signal is absent; 6. Short to Ubat. Pinout A302 M / 15.

Fault codes categories

Contact Us
Order callback
Request Offer
Price notifications
We will inform you by mail when the product arrives at the trading site, wheter its price will change
Arrival notifications
You will receive a notification about the arrival of this product at the site by e-mail.